Application design of constant torsion spring in bicycle nest

원천:Qianye 정밀 시각:2022-9-14

The bicycle nest is an automatic lifting device for bicycles, which is placed on the ceiling of the room and can be stably raised and stored on the roof. It can safely accommodate any bike, no matter its shape or size.

The storage method is simple. If you need to get on the bike, gently pull on the loose rope, then push the bike down and the bike will be lifted. If you want to take the bike off, you just have to gently pull your bike down and let the bike fall to the ground. This bike rack is designed so that you can easily place your bike, and you can store your bike almost anywhere.

It maximizes the bike’s on-road storage space. What makes this unit unique is its unique spring mechanism. You don’t need power or pulleys to easily lift the bike for you, just your fingertips guide. The unique spring mechanism is the key reason the bike nest moves the bike up and down, making this spring challenging to make. There are strict requirements on the length and stability of the spring, and the spring that does not meet the standard is unqualified.

The bicycle nest is attached to your ceiling with two bolts and uses a spring mechanism to raise your bike. Just like a functioning set of blinds, a gentle pull on the cable will bring your bike to the ground. You can also park the bike anywhere while it’s down, which means the bike nest also doubles as a light workbench.The corresponding thickness shall be maintained on the basis of fixed length, and the strength of each constant torque spring shall be stable. Otherwise, the effect of steadily lifting the bicycle will not be achieved. Therefore, it is very important to choose a good constant torque spring. Qianye 정밀도 is a global spring manufacturer with more than 20 years of spring manufacturing experience. As a professional spring supplier, we can provide all kinds of constant torque springs, as well as various application designs and solutions for constant torque springs. We sincerely suggest that customers can obtain consulting services with our R & D engineers at the early stage of product introduction and development. According to the needs of customers and assist in product design, development, proofing, so that your products can find the best solution to meet your application needs.