Maison > Blog
What should we know about the installment of the constant force spring ?

2023-08-21

Constant force spring usually installed with one end wrapped tightly on the drum and the other end connected to the load. We should know below knowledge during the installment procedure.   The drum diameter should be 10% to 20% larger than its natural diameter.   One and one-half length of the spring should bewrapped on […]

Constant force springs in fridge doors

2023-08-21

In order to make the fridge run efficiently, modern fridge doors can incorporate constant force springs to allow is to close automatically after you have opened the fridge for use. Nowadays it is this design that is still rare on the market, usually magnetic fridge doors. If the door is left open for a long […]

The spring in the timer

2023-08-21

A timer is an accurate timekeeping device that uses a mechanical clock to drive a switch, and its time positioning is very accurate because the spring plays a big role. When the timer is screwed to a certain scale, it actually does two things, one is to tighten the spring, which provides the power to […]

The role of power spring in power supply reel

2023-08-21

With the rapid development of electrical appliances, from time to time, we see that household appliances have reels in them. The reel uses a retractable storage structure to store the power cord of the electrical appliance inside the appliance, which can avoid the messy and disordered space caused by the long winding of the wire. […]

Monitor Stand Spring

2023-08-21

Thin displays (LED displays, etc.) have been widely used as display devices for purposes such as viewing television programs and displaying operation screens of personal computers. The advantage of such a thin display is that the thickness of the monitor part (display) is small, and the weight of the display is lighter than conventional products such […]

How to design a variable force spring?

2023-08-21

Variable force springs and variable torsion springs can break through the influence of Hooke’s law on traditional springs, so that the stroke and force no longer increase in proportion to each other, but can achieve a negative slope stepped constant force and other combinations of elasticity-displacement, according to the needs of the mechanical engineering, the […]

What are the factors that cause premature spring damage ?

2023-08-21

According to the informal statistics, the cycle life of high-quality springs can reach more than ten years or even longer under normal use. If the spring quality is not qualified, or there are some improper actions during using process, it may make the springs become premature useless. Then, let’s take a look at the factors that cause the premature failure of […]

Constant force springs for shelving

2023-08-21

The new structure is simple, reasonable, orderly, small space, easy to take and place, the goods are automatically replenished, not easy to scatter, neatly placed.   The working principle of the bar spring is that when an external force is applied to straighten it, the bar will naturally coil back to its original shape, so […]

What parts should be paid attention to in spring correction?

2023-08-21

Stainless steel spring is a common basic component, which is indispensable for many products. Normally, in order to optimize the quality of the spring, manufacturers will carry out correction treatment. Of course, if there is any inappropriateness in the processing, it will seriously affect the processing effect, so everyone must be careful when correcting.   There […]