Hjem > Blog > Brancheinformation > Constant force spring applied to the brake for remote surgery

Constant force spring applied to the brake for remote surgery

kilde:Qianye præcision tid:2022-9-14

Minimally invasive medical technology is used to reduce the number of foreign tissues that may be damaged during diagnosis or surgery, so as to reduce the recovery time, discomfort and adverse side effects of patients. The surgeon can operate the controller on the console to indirectly operate the instrument connected to the remotely operated actuator. The instrument can be disassembled from the remotely controlled actuator, so that the instrument can be disinfected separately and selected to be used as the instrument required for surgery. Combine. Instruments may be changed during surgery.

  Using remote instruments for surgery brings new challenges. One problem is to provide a remotely operated motor mechanism that supports a remotely operated actuator that can be positioned relative to a patient. These features are quite heavy and may weigh between 12 and 24 kilogramsThe mechanism must be moved over the patient and carefully positioned. Therefore, it is necessary to balance the surgical instrument, the associated actuator, and the support structure so that the surgical instrument can be safely and easily positioned.

The constant force spring is made of stainless steel strip, so that when it is rolled up relative to being stretched, the spring will relax in a low stress state. When it unfolds, the restoring force mainly comes from the part close to the loosened spring coil. Specifically, the force comes from the region that transitions from a circle to a plane. The force does not come from the part of the drum that is fully unfolded or still winding. The resultant force is almost constant because the geometry of this area remains almost constant when the spring is deployed.

  As shown in Figure 2, the constant force spring 400 is connected to the vertical column 300 at the lower end 402 of the constant force spring. The constant force spring 400 is wound around the drum 404 supported by the upper end of the extensible support assembly 110. The constant force spring resists the gravity acting on the structure it supports, including the vertical column 300 and the surgical instrument. The constant force spring 400 provides a basically constant balance force for the support column 300 and the attachment structure, but its support load is more constant and different than what can be achieved by using the constant force spring alone. It is necessary to provide a balance force that can be compensated.

  The constant force spring device comprises a bracket, a drum rotatably supported by the bracket, and a constant force spring wound on the drum. The motor is fixed on the bracket to provide compensation force for the drum. The motor can be located within the internal volume of the drum. The control module can be connected to the motor to control the compensation force. The position sensor can be coupled to the control module. The compensation force can respond to the signal from the position sensor. The constant force spring can support the load and balance the gravity of the load. When the load approaches the end of the range of motion, the compensation force can be adjusted.

  From the initial design stage to the production and final assembly of  constant force springQianye precision can save customers product development time and find optimization solutions that exceed your expectations. There are no manufacturability constraints in product design, and the best product quality and best support and service can meet customers’ needs.Qianye precision sincerely recommend our customers to consult with our R&D engineers at the early stage of product introduction and development.We assist in product design, development, and prototyping according to customer needs, so that you can find the best solution for your product to meet your application needs.

Seneste nyt

 Exploring the Versatility of Miniature Torsion Springs
Exploring the Versatility of Miniature Torsion Springs

Time:2023-8-10

Introduction Miniature torsion springs are small mechanical components that are used in a wide range of industries and applications. They are characterized by their ability to resist torsional forces, providing rotational equilibrium or storing and releasing energy. Despite their small size, these springs play a crucial role in the functioning of various devices and systems. In this article, we will...

 Tailored Springs: Customized Solutions for Your Specific Needs
Tailored Springs: Customized Solutions for Your Specific Needs

Time:2023-6-20

Springs are an essential component in many products, ranging from simple pens to complex machines. They are known for their ability to store energy and release it when needed. However, not all springs are created equal. Depending on the application, different types of springs may be required to meet specific requirements. This is where tailored springs come in. Tailored springs...

 The power spring makes the tape measure shrink freely
The power spring makes the tape measure shrink freely

Tid: 2022-9-14

Tape measure, I believe everyone is familiar with it. Tape measure is a common measuring tool in our daily life and work. After the tape measure is pulled out, it can be rolled up because there is a power spring in the tape measure. When pulling out to measure the length, it actually lengthens the length of the scale and spring. Once the...

 China high quality Window Constant Force Spring: A Reliable Solution for Smooth and Efficient Window Operations
China high quality Window Constant Force Spring: A Reliable Solution for Smooth and Efficient Window Operations

Time:2023-7-15

Introduction Windows play a crucial role in our homes and buildings, providing natural light, ventilation, and a connection to the outside world. However, operating windows can sometimes be a challenging and cumbersome task, especially for those with limited physical strength or mobility. This is where the window constant force spring comes into play, offering a reliable solution for smooth and...

 Spiral Torsion Spring Design: An Exploration in Engineering and Manufacturing
Spiral Torsion Spring Design: An Exploration in Engineering and Manufacturing

Time:2023-11-9

Introduction: Spiral torsion springs are essential mechanical components used in various industries, including automotive, aerospace, and medical. These springs possess unique properties that make them suitable for applications requiring rotational force and torque. This article aims to delve into the intricacies of spiral torsion spring design, highlighting the engineering principles and manufacturing techniques involved in their production. 1. Understanding Spiral...

 Efficiently Powering Machines with Consistent Energy: The Versatility of Constant Force Springs
Efficiently Powering Machines with Consistent Energy: The Versatility of Constant Force Springs

Time:2023-5-19

Machines require energy to operate, and the type of energy utilized can have essential implications beyond powering the machines themselves. One of the primary features required of machine energy sources is their consistency. Nonetheless, with several types of springs, they often function well until they relax, causing problems for applications that require consi‌‌stency to function appropriately like toys, clocks and...

Product